Crown Analog input, 4 channel, 300W per output channel CDi 4|300

by EatMyBeats

$2,018.99

1 in stock

Shipping cost $2.00
Total Payable Amount $2,020.99
SKU: 6703359885480 Categories: , Tag: Item sold: 0

The CDi DriveCore Series is an evolution in amplification, providing an impressive mix of high-performance; rich feature set, and competitive cost.  Using technology derived from our flagship Installed Sound amplifier (Crown DriveCore Install series), the CDi DriveCore 4|300 offers streamlined functionality to work in almost any small/medium sized installation such as restaurants, retail stores, and more.  Designed for ease-of-use in a variety of applications, the 4|300 is a 4-channel amp that includes network control/monitoring, high-level DSP, front-panel interface, and support for driving up to 100Vrms speaker loads without requiring a transformer.  The entire CDi DriveCore line comes pre-loaded with JBL speaker tunings to help make installations quicker and easier.

Output Power: Dual Mode CDi DriveCore Model
4|300

Channels
4


150W


300W


300W

16Ω
150W

70Vrms
300

100Vrms
300

Minimum Guaranteed Power (1kHz, all channels driven, max distortion 0.5%, duration 0.5 seconds, 120 – 240Vrms – 50/60Hz)

Output Power: Bridge Mono Mode CDi DriveCore Model
4|300


300W


600W

16Ω
600W

140Vrms
600W

200Vrms
600W

Minimum Guaranteed Power (1kHz, all channels driven, max distortion 0.5%, duration 0.5 seconds, 120 – 240Vrms – 50/60Hz)

Features

DriveCore Technology – Crown’s proprietary DriveCore technology eliminates hundreds of components within each amplifier, reducing the variability of component values, increasing reliability, resulting in incredible audio fidelity from an efficient design.

Network Control and Monitoring – Through Harman’s HiQnet Audio Architect software, the CDi DriveCore can be controlled, configured, and monitored through standard TCP/IQ network.

DSP – On-board Digital Signal Processor in each amplifier allows for custom configuration

  • Input Router
  • Input Delay – Up to 1000ms
  • Input Parametric EQ – 8 band
  • Crossover
  • Output Parametric EQ – 8 band
  • Output Delay – Up to 100ms
  • LevelMAX™ Limiter

BLU link (BL models only) – Both receive and send channels over HARMAN’s 256 channel, fault-tolerant audio BUS, BLU link

Direct Drive 70/100Vrms Output – Each output channel is capable of provide either 70V or 100V for high impedance applications.

Front-Panel Interface – Completely configure the amplifier using an intuitive front-panel interface.

GPIO/AUX Port – Recall presets, mute channels, monitor faults, power on/off the amplifier, and more through a combined GPIO/AUX Port.

Specifications

BLU link
No

Sensitivity (for full rated power at 8 ohms)
0.7V RMS

Rated Power Output (per channel @ 4 ohms)
300W

Analog Input Signal to Noise Ratio (ref. rated power, 100V, 20Hz – 20kHz) at 8 ohms)
> 104dB

THD (full rated power, 20 Hz – 20 kHz)
0.35%

Damping Factor (20 Hz to 100 Hz)
> 1000

Frequency Response (8Ω, 20 Hz – 20 kHz)
+/-0.5dB

Crosstalk (below rated power) 20 Hz to 1 kHz
> 80dB

Input Impedance (nominally balanced, nominally unbalanced)
20 kΩ balanced, 10 kΩ unblanced

Dimensions (inches) (W x H x D) (depth not including 1.3 inch front panel protrusion)
19 x 3.5 x 12.25

Weight
16.13 lbs (7.31 kg)

Power Supply Connector
“Standard IEC type 320 inlet for detachable connector 100 – 240V~”

Additional information

Condition

EatMyBeats